Easter Craft: Bunny Ears

To make one of these kid-friendly accessories, you’ll need a child-size headband and about 2 metres of 3cm-wide double- fold bias tape. 

1: Cut an 45cm-long piece of bias tape. Hem the cut ends under 2cm on each side, then stitch together the long side to form a casing. Fold the casing in half so that the ends touch and use a straight pin to mark the fold’s center.

2: Feed an extra-thick, 30cm-long pipe cleaner through one end of the casing, stopping at the pin. Feed a second pipe cleaner through the casing’s other end until it, too, meets the pin; remove pin. Bring the casing’s open ends toward each other and twist the exposed pipe cleaners together to form a rabbit ear shape. Repeat steps one and two to make a second ear.

3: Cut a piece of bias tape the length of the headband, plus 3cm extra. Wrap the tape over the headband, then use pins to mark the two spots where you want to attach the ears (use the photo above for guidance).

4: Remove the tape from the headband and stitch the long side together, from the pins out to both ends of the tape; stitch these ends closed, and remove pins. Twist the ears’ pipe-cleaner ends around the headband in the desired spots, then slide each end of the headband into the casing. Use a needle and thread to slip-stitch the tape around and between the ears closed.

No comments:

Post a Comment

Comments make my day! Thanks for visiting.x

Related Posts Plugin for WordPress, Blogger...